PROJECT
Wine bottle puzzle
Rea Gibson
Find more Toys / Puzzles projects
To enjoy this wine you have to solve the puzzle.
Actually, it’s a good thing that you can’t get to the wine until after the puzzle is solved, or you might just give up too easily.
The base of the puzzle is made up of ½” material but you can use ¾” material providing you leave at least 3 ¼” x 3 ¼” inside space for the average bottle.
Wine bottle puzzle
The top part of the puzzle (that sits on the wine bottle) can be turned or shaped by hand.
- Cut out the shapes as shown in the drawings.
- Make ⅛” dadoes in the sides to hold the bottom.
- Screw the locking panel with the two ⅜” holes into place before assembly.
The sides are glued together with simple butt joints.
Be sure to set the bottom into place as you clamp up.
The ropes are glued into place as shown.
Find the solution here.
[illustrations_gallery]
I am still looking for the solution and the similarity to other styles of the rope puzzle
Hi John: You’ll find the solution to the wine bottle puzzle here: https://dev.canadianwoodworking.com/project/tower-of-brahma-puzzle/